In Part 6 we looked at the serial port. This final part covers the installation of the MIDI remapper inside the XB5 organ.
The remapper was installed inside the organ on the LHS near the front. The Arduino UNO has an internal voltage regulator with a recommended input range (VIN) of +7 to +12V (20V absolute maximum). This allowed the remapper to be powered from the organs raw DC supply.
MIDI Modifications
I needed to hardwire the output of the remapper to the MIDI out socket on the organ. However, I also wanted there to be an unmodified MIDI out which bypassed the remapper. This would mean that the organ could still be used with MIDI devices other than the Ferrofish B4000+ if required. I decided to sacrifice the original MIDI ‘thru’ functionality (which I have never used) so that the thru connector could be repurposed as an unmodified MIDI out. A simple way of implementing this was to connect the XB5 MIDI output to both the input of the remapper and the repurposed socket. This meant that, if the unmodified output was used, the XB5 MIDI output would be connected to two MIDI inputs simultaneously. Although the MIDI specification does not say you can do this, in practice it worked reliably. The modifications to the organ are shown in Fig. 1.
![]() |
| Fig.1 - XB5 MIDI Modifications |
Conclusions
The project has achieved my aim of allowing the main organ functions of the B4000+ to be controlled using the pushbuttons and drawbars on the XB5. Along the way I have improved my knowledge of the MIDI standard and further developed my skills in Arduino programming.
Postscript
After completing the project I ended up selling the organ as I needed something smaller and lighter to play in a band. I am glad I included the unmodified MIDI out which bypasses the remapper, meaning that the organ can still be used with MIDI devices other than the Ferrofish B4000+ if required.
Reference
The MIDI Manufacturers Association (1996), MIDI 1.0 Detailed Specification Version 4.2.1. Available at: https://midi.org/midi-1-0-detailed-specification (Accessed 17th November 2026).
Disclaimer: This is my personal blog. Views expressed in my posts are my own and not of my employer. The information provided comes with no warranty. I cannot be held responsible for the content of external websites. Any practical work you undertake is done at your own risk. Please make health and safety your number one priority.

Comments
Post a Comment